PowerPro Screw Plug Immersion Heaters by Powerblanket
We use screw plug immersion heaters to heat a variety of liquids and gasses. You can mount them in a tank or inside a vessel through an NPT connection. Waters and oils are the most common products for heating in screw plug applications. Screw plug heaters can safely add heat to your process within a hazardous-rated area, as all PowerPro heaters have hazardous area approvals. These approvals allow them to be installed in various hazardous classified areas such as Class 1 Div 1 and Div 2, as well as IECEx and ATEX required designs. You can control units with a simple thermostat or a more sophisticated sensor and control panel. Work with your PowerPro representative today to select or replace the right screw plug immersion heater for your needs.
IMMERSION HEATERS
Maintain Ideal Temperature
Keep your liquid product at safe, workable temperatures for your critical processes.
Preserve Temperature Sensitive Materials
Safely heat and protect a wide variety of liquids and other products.
Easy Process & Installation
We make it quick and easy to replace your damaged or aging screw plug immersion heaters.
Safety Certified
Every PowerPro heater is certified to UL/CSA standards and rated for C1D2 & C1D1 areas, ensuring you meet regulatory requirements and maintain workplace safety standards
Get Peace of Mind
Get peace of mind with replacement immersion heaters stored and ready to be sent
Screw plug immersion heaters are used to heat a variety of liquids and gasses in industrial applications
Electric immersion heaters vary in size and features depending on the application. PowerPro screw plug heaters can easily be customized to fit your needs. They range in output from small wattages to well over 5 megawatts and voltages from 120V to over 690V. Our screw plug heaters can deliver up to 1,200°F for heating liquids, oils, gases, or air in industrial applications, without causing damage. Hazardous area approvals allow our immersion heaters to be installed in various <a href=”https://www.powerblanket.com/custom/hazardous-locations/”>hazardous classified areas</a>, including Class 1 Div 1 and Div 2, as well as IECEx and ATEX required designs.
Our immersion heaters can be controlled by a local thermostat mounted directly on the unit or via a <a href=”https://www.powerblanket.com/custom/controllers/”>control panel</a> and temperature sensors wired into your local automation system.
We specialize in replacing your old, inefficient, or damaged immersion heater element with the highest quality heaters, regardless of the existing brand. Replace your old screw plug heaters with PowerPro heaters to optimize your process temperatures and increase efficiency. Call us today to get started.
- Heating liquids
- Heating Oils
- Heating Gasses
- Heating Air
NEED A COMPLETE, ENGINEERED SOLUTION FOR YOUR PROCESSES?
Fill out the form and we will contact you with a custom bid. Or feel free to give us a call at 877.219.7319 or use our contact form.
How Long Have Your Screw Plug Immersion Heaters Been on the Job?
Your immersion heating elements degrade over time. In fact, within 5 years, your heaters may have lost around 30% of their heating capacity. If you've neglected ongoing maintenance, your heaters could be worse off—or even close to failure.
Replacing immersion heaters in existing applications is our specialty. PowerPro immersion heaters offer a straightforward solution for your processes. We will work with you to understand your needs and create a made-to-fit heating solution to replace your old heaters. Contact us today for a screw plug heater that perfectly fits your needs.
