Powerbanket HB54 model 48”x48”x66” bulk material warmers offer cutting-edge technology for freeze protection, chemical storage, and viscosity control in a flexible, easy-to-install design that will effectively, evenly, and reliably heat your materials. Our patented design eliminates hot and cold spots by applying uniform full-coverage heat across the entire surface of the container, allowing users to keep materials at the proper viscosity while remaining at specified thermal levels.

48”x48”x66” bulk material warmers come in two different thermal rating classes: 
  • Powerblanket - designed for any definitive heating applications, surrounded by a rugged vinyl shell in a wraparound design with a removable top, safely raises material temperatures as high as 145 F and can be used in temperatures as low as -20 F
  • Powerblanket Xtreme (Roofer’s Hot Box)- designed for harsh climates, surrounded by a rugged vinyl shell in a wraparound design with a removable top, safely raises material temperatures as high as 145 F and can be used in temperatures as low as -20 F

All of our 54 cubic foot, 48”x48”x66” bulk material warmers come as an insulated, water-resistant full-wrap design with cinch straps to secure a tight fit. All Powerblanket products are ETL certified to UL, CSA, and CE safety standards.

  • Maintains an internal temperature as high as of 120°F / 49°C (± 5°F / 3°C)
  • Provides an insulated full-wrap design
  • Delivers uniform heat to temperature sensitive materials & products
  • Offers quick and easy assembly for portability and storage
  • Localize heat and save money by not heating a warehouse or building
  • Preserve expensive materials without scorching or burning
  • Prevent waste by maintaining consistent temperatures
  • Is a great solution for palletized products: paint, caulk, resins and epoxies, etc.
  • Features top and side access doors
  • 6 foot power cord
  • Custom sizes available upon request
  • Certified by ETL to UL & CSA safety standards
RECOMMENDED

HOT BOX FANS

  • Improves even heat distribution
  • Optimizes heating process
  • Ideal for curing applications

$179.00

ADD TO CART

0 CUSTOMER REVIEWS

Write a Review

    Powerblanket Bulk Material Warmer - Pallet Heater - Hot Box Heater

    Powerblanket Hot Boxes saves money by keeping products from freezing without the risk of overheating. The Hot Box pallet warmer is easily assembled, taken apart, and reassembled. Hot boxes are ideal for cold weather storage, freeze protection, job site heating, transporting, remote location use, and winter roofing. Standard Hot Boxes hold products between 100°F and 120°F (38°C and 49°C). The optional adjustable thermostatic controllers allow temperatures to be precisely controlled.

    EPDM

    EPDM (rubber) membrane roofing is even more temperature sensitive than asphalt (composition) shingles. EPDM is joined together using an extensive amount of adhesive, and the adhesive must have high temperatures to be pliable enough to install and cure. Very thick and hard to work with even at high temperatures, manufacturers recommend temperatures be above 45 degrees Fahrenheit (7 degrees Celsius) for installation. That recommended temperature is not very practical unless you have a warm storage area available to keep the adhesive warm until the moment it is used.

    Asphalt Shingle

    Almost all types of roofing material utilize adhesive that requires warm temperatures during the installation process. These adhesives require warm temperatures (heat source) to properly cure and fasten. Without proper fastening, a roof will often fail quickly, if not immediately. In the summer, the sun’s heat will properly adhere most roofing materials: asphalt shingle, EPDM (rubber) single-ply membrane, roll roofing, peel and stick roofing, and modified bitumen. Added effort and expense are required to apply these materials in cold winter weather.

    Powerblanket Bulk Material Warmer Hot Boxes - Think Inside the Box!

    Powerblanket Pallet Warmers:

     

    Preserve temperature sensitive bulk material and equipment

    Delivers uniform heat to temperature sensitive materials & products

    Provides an insulated full-wrap design

    Features top and side access doors

    Prevent waste by maintaining consistent temperatures

    Localize heat and save money by not heating a warehouse or building

    Offers quick and easy assembly for portability and storage

    Custom sizes available upon request

    Heat materials and pallet products: adhesives, roofing shingles, paint, caulk, resins and epoxies, construction material & equipment, etc

    Enhance the efficiency of Powerblanket’s bulk material warmers with Hot Box Fans, designed for optimal temperature control and even heat distribution.

    Product details image Product details image
    ïcon

    ADDITIONAL RESOURCES

    LEARN MORE HERE

    NEED MORE INFORMATION?

    phone 833.913.2645

    CONTACT US